Seminars in Arthroplasty
Volume 22, Issue 4 , Pages 218-224 , December 2011

Ceramic Versus Metal Femoral Heads in Combination With Polyethylene Cups: Long-Term Wear Analysis at 20 Years

References 

  1. Harris WH . The problem is osteolysis . Clin Orthop Relat Res . 1993;311:46–53
  2. Devane PA , Horne JG , Martin K , et al.  Three-dimensional polyethylene wear of a press-fit titanium prosthesis: Factors influencing generation of polyethylene debris . J Arthroplasty . 1997;12:256–266
  3. Dowd JE , Sychterz CJ , Young AM , et al.  Characterization of long-term femoral-head-penetration rates . J Bone Joint Surg Am . 2000;82:1102–1107
  4. Iwase T , Wingstrand I , Persson BM , et al.  The ScanHip total hip arthroplasty—Radiographic assessment of 72 hips after 10 years . Acta Orthop Scand . 2002;73:54–59
  5. Dumbleton JH , Manley MT , Edidin AA . A literature review of the association between wear rate and osteolysis in total hip arthroplasty . J Arthroplasty . 2002;17:649–661
  6. Zichner L , Lindenfeld T . In-vivo-Verschleiss der Gleitpaarungen Keramik-Polyethylen gegen Metall-Polyethylen . Orthopäde . 1997;26:129–134
  7. Weber BG , Fiechter T . Polyethylenverschleiß und Spätlockerung der Totalprothese des Hüftgelenkes (Neue Perspektiven für die Metall-Metall-Paarung für Pfanne und Kugel) . Orthopäde . 1989;18:370–376
  8. Hierholzer G , Jukema GN . Die zementfreie Robert Mathys Hüftgelenkpfanne . In:  Bergmann EG editors. Die RM-Pfanne: Monographie eines beschichteten Hüftgelenkimplantates. Eichhorn Presse Verlag; 1997;p. 52–63
  9. Mathys R , et al.  The coating of hip joint cups on their outer surface . In:  Willert HG ,  Buchhorn GH ,  Eyerer P editor. Ultra-High Molecular Weight Polyethylene as Biomaterial in Orthopaedic Surgery . Toronto: Hogrefe & Huber Publishers; 1991;p. 243–247
  10. Harris WH . Traumatic arthritis of the hip after dislocation and acetabular fractures: Treatment by mold arthroplasty (An end result study using a new method of result evaluation) . J Bone Joint Surg Am . 1969;51:737–755
  11. Russe W . Röntgenphotogrammetrie der künstlichen Hüftgelenkspfanne. In:  Burri C ,  Harder F ,  Bauer R editor. Aktuelle Probleme in Chirurgie und Orthopädie. Bern: Hans Huber Verlag; 1988; Bd. 32
  12. Ilchmann T , Franzén H , Mjöberg B , et al.  Measurement accuracy in acetabular cup migration (A comparison of four radiologic methods versus roentgen stereophotogrammetric analysis) . J Arthroplasty . 1992;7:121–127
  13. Ilchmann T , Mjöberg B , Wingstrand H . Measurement accuracy in acetabular cup wear (Three retrospective methods compared with Roentgen stereophotogrammetry) . J Arthroplasty . 1995;10:636–642
  14. Ilchmann T . Radiographic assessment of cup migration and wear after hip replacement . Acta Orthop Scand . 1997;68(Suppl 276):1–26
  15. Hui AJ , McCalden RW , Martell JM , et al.  Validation of two and three-dimensional radiographic techniques for measuring polyethylene wear after total hip arthroplasty . J Bone Joint Surg Am . 2003;85:505–511
  16. Schmalzried TP , Shepherd EF , Dorey FJ , et al.  The John Charnley Award (Wear is a function of use, not time) . Clin Orthop Relat Res . 2000;381:36–46
  17. Goldsmith AAJ , et al.  The effect of activity levels of total hip arthroplasty patients on socket penetration . J Arthroplasty . 2001;16:620–627
  18. Kusaba A , Kuroki Y , Kondo S , et al.  Frictional torque and wear of retrieved hip prostheses: A comparison between alumina/PE and Co-Cr/PE prostheses . J Long Term Eff Med Implants . 2002;12:53–62
  19. Semlitsch M , Willert HG . Clinical wear behaviour of ultra-high molecular weight polyethylene cups paired with metal and ceramic ball heads in comparison to metal-on-metal pairings of hip joint replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 1997;211:73–88
  20. Woolson ST , Murphy MG . Wear of the polyethylene of Harris-Galante acetabular components inserted without cement . J Bone Joint Surg Am . 1995;77:1311–1314
  21. Dahl J , Nivbrant B , Søderlund P , et al.  Less wear with 28 mm alumina heads against conventional PE - A 10 year RSA study . In: Presented at the 60th Annual Meeting of the Norwegian Orthopaedic Society, Abstract 94, Oslo, Norway. October 24-26, 2007;
  22. Urban JA , Garvin KL , Boese CK , et al.  Ceramic-on-polyethylene bearing surfaces in total hip arthroplasty : Seventeen to twenty-one-year results . J Bone Joint Surg Am . 2001;83:1688–1694
  23. Kordelle J , Starker M . Migrationsanalyse zementierter Müller-Polyethylenpfannen versus zementfreier Zweymüller-Schraubpfannen. Z Orthop. 2000;138:46–51
  24. Sugano N , Nishii T , Nakata K , et al.  Polyethylene sockets and alumina ceramic heads in cemented total hip arthroplasty (A ten-year study) . J Bone Joint Surg Br . 1995;77:548–556
  25. Saito M , Saito S , Ohzono K , et al.  Efficacy of alumina ceramic heads for cemented total hip arthroplasty . Clin Orthop Relat Res . 1992;283:171–177
  26. Schüller HM , Marti RK . Ten-year socket wear in 66 hip arthroplasties (Ceramic versus metal heads) . Acta Orthop Scand . 1990;61:240–243
  27. Livermore J , Ilstrup D , Morrey B . Effect of femoral head size on wear of the polyethylene acetabular component . J Bone Joint Surg Am . 1990;72:518–528
  28. Crowther JD , Lachiewicz PF . Survival and polyethylene wear of porous-coated acetabular components in patients less than fifty years old (Results at nine to fourteen years) . J Bone Joint Surg Am . 2002;84:729–735
  29. Goodman SB , Huie P , Song Y , et al.  Cellular profile and cytokine production at prosthetic interfaces . J Bone Joint Surg Br . 1998;80:531–539
  30. Willert HG . Tissue reactions to metallic and plastic wear products of joint endoprostheses. In:  Gschwend N ,  Debrunner HU editor. Total Hip Prostheses . Bern: Hans Huber Verlag; 1976;p. 205–239
  31. Orishimo KF , Claus AM , Sychterz CJ , et al.  Relationship between polyethylene wear and osteolysis in hips with a second-generation porous-coated cementless cup after seven years of follow-up . J Bone Joint Surg Am . 2003;85:1095–1099
  32. Kim YH . Long-term results of the cementless porous-coated anatomic total hip prosthesis . J Bone Joint Surg Br . 2005;87:623–627
  33. Grübl A , Chiari C , Giurea A , et al.  Cementless total hip arthroplasty with the rectangular titanium zweymüller stem (A concise follow-up, at a minimum of fifteen years, of a previous report) . J Bone Joint Surg Am . 2006;88:2210–2215
  34. Garcia-Cimbrelo E , Cruz-Pardos A , Madero R , et al.  Total hip arthroplasty with use of the cementless zweymüller alloclassic system (A ten to thirteen-year follow-up study) . J Bone Joint Surg Am . 2003;85:296–303
  35. Harris WH . Conquest of a worldwide human disease (Particle-induced periprosthetic osteolysis) . Clin Orthop Relat Res . 2004;429:39–42
  36. Hallan G , Lie SA , Havelin LI . High wear rates and extensive osteolysis in 3 types of uncemented total hip arthroplasty: A review of the PCA, the Harris Galante and the Profile/Tri-Lock Plus arthroplasties with a minimum of 12 years median follow-up in 96 hips . Acta Orthop . 2006;77:575–584

PII: S1045-4527(11)00110-6

doi: 10.1053/j.sart.2011.09.001

Seminars in Arthroplasty
Volume 22, Issue 4 , Pages 218-224 , December 2011

Article Tools

* Image Usage & Resolution